Shenyang Ventilation duct The manufacturer's use of ventilation ducts for cooling is the current cooling method for the main stream of the factory workshop, so what details should be paid attention to when using ventilation ducts for cooling?
1. Ventilate and cool down. Because the sun shines on buildings, machinery, equipment, human body and other heat sources, the temperature of places requiring ventilation is higher than that of outdoor places. The negative pressure fan can quickly discharge the hot air in the room, so that the room temperature and the outside temperature are equal, and the temperature in the workshop will not rise.
2. Air flow takes away human body heat. Air flow accelerates sweat evaporation and absorbs human body heat, making human body feel cool, as cool as natural wind.
3. As long as the negative pressure fan has the function of ventilation and cooling, it has no refrigeration function. Cool is the feeling of the human body. It is ignorant to say how much the negative pressure fan can reduce the temperature.
4. The whole ventilation pipe manufacturer Ventilation engineering It is required to cooperate with the water curtain to control the temperature in the workshop within 28 ℃ in the hot summer. But the human body's cool feeling can be compared with that of the air conditioner. People facing the water curtain for a long time will feel cold and can't stand it Pulse dedusting project, woodworking workshop dedusting project, cyclone dedusting project, environmental protection air conditioning project, air conditioning project, waste gas purification project, assembly line project.
Ventilation duct manufacturer's ventilation duct Spiral duct The installation of has significantly reduced the connection points between pipes, reducing the leakage at the joint of pipe fittings to a low degree. The length of typical spiral air duct is 3~6m, while the length of typical rectangular air duct is only 1~1.5m; And only one pipe connector is needed to connect two spiral air ducts, while the connection of traditional rectangular air ducts often requires a completely independent double flange system.
The content of this article comes from the network. If you have any questions, please contact me to delete it!
