Pipe dredging is a kind of maintenance service commonly used in people's daily life, which generally refers to the dredging of domestic sewage pipes, toilet pipes, and industrial pipes. Here is a brief introduction Ventilation pipe construction The skill of pipeline dredging in.

Use soda and vinegar to dredge. First pour a proper amount of cooked soda powder into the sewer, and then pour a proper amount of high concentration vinegar. The strong chemical reaction between soda powder and vinegar can remove grease and other sticky things in the pipeline; Use an air pump to dredge. In case of blockage of nearby small pipes, the rubber hose of the air pump can be plugged into the sewer, and the sewer can be sealed, then sufficient water can be put in, and the pipes can be dredged by quickly pumping air into the sewer; Use logs to dredge. First, insert a log with a diameter very close to the drainage outlet into the drainage outlet, put enough water into the pool, and then quickly pull the log up and down. Under the effect of pressure and suction, the dirt in the pipeline may be washed away.

Water pressure can also be used to dredge. Take a plastic pipe with a diameter of 15mm and a length of about 10m near the pipe dredge. One end is tightly sleeved on the tap, and the other end is wrapped around the rubber pipe with silk wool nearby. Plug it into the sewer, open the tap and tighten it to a large size. The pressure and rapid flow of tap water will wash away the blockage.

The above is the skill of pipeline dredging in pipeline engineering. It is dangerous to use the above method to dredge the pipeline. Please use it on the premise of ensuring safety.

The content of this article comes from the network. If you have any questions, please contact me to delete it!